Removal Procedure
WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
Rear Bumper Fascia (1) - Remove - Rear Bumper Fascia Removal and Installation (without Blackwing) , or Rear Bumper Fascia Removal and Installation (with Blackwing)
- Reposition the wiring harness.
- CAUTION:
Refer to Eye Protection Warning .
Drill out the 2 exhaust heat shield rivets (1).
- Exhaust Tail Pipe Heat Sleeve Bolt [2x] - Remove
- Exhaust Tail Pipe Heat Sleeve (3) - Remove