LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2021 >> CT4 Sport, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 79 (Seat Hardware, Trim, And Upholstery) >> Repair Instructions >> Rear Seat Armrest Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
  1. GM5326630Courtesy of GENERAL MOTORS COMPANY

    Rear Seat Back Cushion (1) - Remove - Rear Seat Back Cushion Removal and Installation (60 Percent Seat) , or Rear Seat Back Cushion Removal and Installation (40 Percent Seat) 

  2. GM5326626Courtesy of GENERAL MOTORS COMPANY

    Reposition the seat back cushion cover as needed.

  3. Rear Seat Armrest Hinge Finish Cover (1) - Remove
  4. Rear Seat Armrest Bolt (2) - Remove [2x]
  5. Rear Seat Armrest Clip (3) - Remove
  6. Remove the rear seat armrest hinge finish bracket (4) from the rear seat armrest (5).
  7. GM5569081Courtesy of GENERAL MOTORS COMPANY

    Lower the rear seat armrest about three quarters the way down.

  8. Using an appropriate flat-bladed tool, gently pry outwards on the inboard armrest hinge cover (1) retaining tab.
  9. Lift up on the rear of the armrest to disengage the rear seat armrest retaining pin.
  10. Rear Seat Armrest (2) - Remove