Removal Procedure
WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
Using a suitable plastic trim tool, release the retaining tab.
- Front Seat Back Upper Cover (1) - Remove [2x]
- NOTE:
It may take considerable force to remove the front seat head restraint.
Grasping the top of the front seat head restraint (1), pull forward and down to release the retaining tab from the front seat back finish panel.
- Front Seat Head Restraint (1) - Remove
Using a suitable plastic trim tool, release the retaining tabs.
- Front Seat Cushion Front Finish Cover (1) - Remove
Front Seat Back Finish Panel Bolt (1) - Remove [4x]
- Release the upper front seat back finish panel tabs from the front seat head restraint frame.
- Release the upper front seat back cover J-channel retainers and reposition the upper front seat back cover as necessary to access the spring clip retainers.
- Use an appropriate tool to release the spring clip retainers.
- Front Seat Back Finish Panel (2) - Remove
Using a suitable pointed or flat bladed tool, push both metal clips (1) rearward while lifting upward on the front seat head restraint frame.
- Front Seat Head Restraint Frame (2) - Remove
Using a suitable flat-bladed tool, push the plastic slot inward and lift upward to remove the guide (1) from the seat back frame.
- Front Seat Head Restraint Guide (1) - Remove