Removal Procedure

WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of GENERAL MOTORS COMPANY

CAUTION:
Improper removal of the knob may result in damage to the switch.

Insert a suitable plastic trim tool under the lower edge of the knobs, and pry outwards to remove.
Front Seat Adjuster Knob (1) - Remove
Front Seat Recliner Knob (2) - Remove
Courtesy of GENERAL MOTORS COMPANY

Reposition the seat as necessary to access the bolts.
Front Seat Cushion Front Finish Cover Bolt (1) - Remove
Front Seat Cushion Outer Finish Cover Bolt -Front (2) - Remove
Front Seat Cushion Front Finish Cover (3) - Remove
Courtesy of GENERAL MOTORS COMPANY

Front Seat Cushion Outer Finish Cover Bolt -Rear (1) - Remove
Squeeze retainer to release.
Disconnect the electrical connector.
Front Seat Cushion Outer Finish Cover (2) - Remove
Courtesy of GENERAL MOTORS COMPANY

Front Seat Adjuster Finish Cover Retainer (1) - Remove
Front Seat Adjuster Switch (2) - Remove
Courtesy of GENERAL MOTORS COMPANY

{ If equipped } Driver or Passenger Seat Lumbar Support Actuator Knob (1) - Remove
Driver and Passenger Seat Lumbar Control Switch (2) - Remove