Removal Procedure
Front Seat Cushion Cover and Pad (2) - Remove - Front Seat Cushion Cover and Pad Removal and Installation , or Front Seat Cushion Cover and Pad Removal and Installation (Blackwing)
Front Seat Adjuster Track Finish Cover - Inner (1) - Remove
Front Seat Adjuster Track Finish Cover - Outer (1) - Remove
Release the retaining tabs securing the front seat inner recliner finish cover (1) to the front seat cushion frame.
- Front Seat Inner Recliner Finish Cover (1) - Remove [2x]
Front Seat Belt Buckle Bolt (1) - Remove
- Disconnect the electrical connector and release the wiring harness retainers as necessary.
- Front Seat Belt Buckle (2) - Remove
Front Seat Adjuster Finish Cover Bolt (1) - Remove [2x]
- Front Seat Cushion Cover Retainer - Front Sideshield (2) - Remove
Front Seat Adjuster Finish Cover Bolt (1) - Remove [2x]
- Front Seat Cushion Cover Retainer - Power Sideshield (2) - Remove
Release the retainers.
- Front Seat Cushion Pad Support (1) - Remove
Front Seat Adjuster Memory Module Bolt (1) - Remove [4x]
- Disconnect and reposition harness as necessary.
- Front Seat Adjuster Memory Module Bracket (2) - Remove
Depress the retaining tabs to release the front seat cushion outer finish cover support (1) from the front seat cushion frame.
- Front Seat Cushion Outer Finish Cover Support (1) - Remove [2x]
Front Seat Lumbar Support (1) - Reposition
Disconnect and reposition harness as necessary.
- Front Seat Upper Bolt (1) - Remove [4x]
- Front Seat Adjuster Stop (2) - Remove [2x]
- Front Seat Cushion Frame (3) - Remove
- Transfer components as necessary.