Removal Procedure

WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.

Courtesy of GENERAL MOTORS COMPANY

Front Seat (2) - Remove - Front Seat Removal and Installation , or Front Seat Removal and Installation (Blackwing)
Courtesy of GENERAL MOTORS COMPANY

Front Seat Cushion Front Finish Cover Bolt (1) - Remove
Front Seat Cushion Outer Finish Cover Bolt -Front (2) - Remove
Front Seat Cushion Front Finish Cover (3) - Remove
Courtesy of GENERAL MOTORS COMPANY

Front Seat Cushion Outer Finish Cover Bolt -Rear (1) - Remove
Squeeze retainer to release.
Disconnect the electrical connector.
Front Seat Cushion Outer Finish Cover (2) - Remove
Courtesy of GENERAL MOTORS COMPANY

Front Seat Adjuster Finish Cover Bolt (1) - Remove [2x]
Front Seat Inner Adjuster Front Finish Cover (2) - Remove
Courtesy of GENERAL MOTORS COMPANY

Disconnect the electrical connector.
Release the retaining tabs.
Driver or Passenger Seat Adjuster Memory Module (1) - Remove
Courtesy of GENERAL MOTORS COMPANY

Front Seat Cushion Front Extension Frame Nut (1) - Remove [4x]
Courtesy of GENERAL MOTORS COMPANY

Front Seat Cushion Front Extension Frame (1) - Reposition
Release the front seat cushion cover retainer.
Front Seat Cushion Cover - Reposition
Courtesy of GENERAL MOTORS COMPANY

Front Seat Cushion Front Extension Pad (1) - Remove
Front Seat Cushion Front Extension Frame (2) - Remove
Courtesy of GENERAL MOTORS COMPANY

Release the retainers to separate the blower (1) from the front seat vent fan mat.
Courtesy of GENERAL MOTORS COMPANY

Disengage the J-channel retainers from the seat cushion frame.
Remove the four retainers (1) holding the front seat cushion cover to the front seat cushion frame.
Disconnect the electrical connectors.
Remove the front seat cushion cover and pad (2) as an assembly.