Installation Procedure
WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
Front Seat Back Frame (2) - Install
- If NEW threaded components are being installed, loosen the adhesive using a metal pick or similar tool before proceeding. If threaded components are reused, prepare the threaded components using the following steps:
- Remove any loose cured adhesive from the external threads of the component using a lint free cloth.
- Thread the cleaned component into the internal mating threads and remove to loosen trapped cured adhesive.
- Apply thread locking adhesive to the external threads of the component. Adhesives, Fluids, Lubricants, and Sealers
- Ensure there are no gaps in the thread locking adhesive once applied to the component.
- Front Seat Frame Bolt (1) - Install and tighten [4x] - Fastener Specifications
Front Seat Back Cover and Pad (1) - Install - Front Seat Back Cover and Pad Removal and Installation (with Seat Back Cushion Finish Panel) , or Front Seat Back Cover and Pad Removal and Installation (without Seat Back Cushion Finish Panel) , or Front Seat Back Cover and Pad Removal and Installation (Blackwing)
CAUTION:
Refer to Fastener Caution .