Installation Procedure
WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
Install the front seat back cover and pad (1) as an assembly.
- Connect the electrical connectors.
- Connect the J-channel retainers.
Front Seat Outboard Seat Back Airbag (2) - Install
- Front Seat Outboard Seat Back Airbag Nut (1) - Install and tighten [2x] - Fastener Specifications
- Connect the electrical connector.
- NOTE:
Some components not shown for graphic clarity.
Front Seat Back Rear Lower Cover (2) - Install
- Attach the front seat back rear lower cover bottom bungee clips to the cushion pan.
- Front Seat Back Rear Lower Cover Retainer (1) - Install [2x]
- Position the rear of the front seat back cover to the original location.
- Hold both sides of the zipper straight down while zipping.
- Using a slight side to side motion reduces zipping efforts.
- Using a suitable tool, slowly zip the left and right front seat back cover zippers.
Front Seat Head Restraint Guide (1) - Install
Front Seat Head Restraint Guide Bezel (1) - Install
- Front Seat Head Restraint (3) - Install
Front Seat Inner Adjuster Front Finish Cover (2) - Install
- Front Seat Adjuster Finish Cover Bolt (1) - Install and tighten [2x] - Fastener Specifications
Connect the electrical connector.
- Front Seat Cushion Outer Finish Cover (2) - Install
- Front Seat Cushion Outer Finish Cover Bolt -Rear (1) - Install and tighten - Fastener Specifications
Front Seat Cushion Front Finish Cover (3) - Install
- Front Seat Cushion Outer Finish Cover Bolt -Front (2) - Install and tighten - Fastener Specifications
- Front Seat Cushion Front Finish Cover Bolt (1) - Install and tighten - Fastener Specifications
Front Seat (2) - Install - Front Seat Removal and Installation , or Front Seat Removal and Installation (Blackwing)
CAUTION:
Refer to Fastener Caution .
NOTE: