LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2021 >> CT4 Sport, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 79 (Seat Hardware, Trim, And Upholstery) >> Repair Instructions >> Front Seat Back Cover and Pad Removal and Installation (Blackwing) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
  1. GM5842458Courtesy of GENERAL MOTORS COMPANY

    Install the front seat back cover and pad (1) as an assembly.

  2. Connect the electrical connectors.
  3. Install the J-channel retainers.
  4. GM5313780Courtesy of GENERAL MOTORS COMPANY

    Front Seat Outboard Seat Back Airbag (2) - Install

    5. CAUTION:

    Refer to Fastener Caution .

  5. Front Seat Outboard Seat Back Airbag Nut (1) - Install and tighten [2x] - Fastener Specifications
  6. Connect the electrical connector.
  7. Install the connector position assurance (CPA) onto the module electrical connector.
  8. Return the front seat back cover and pad to the original position.
  9. GM5752961Courtesy of GENERAL MOTORS COMPANY

    Front Seat Back Ventilation Blower (2) - Install

  10. Connect the electrical connector.
  11. Front Seat Vent Fan Control Module Bolt (1) - Install and tighten [2x] - Fastener Specifications
  12. GM5313789Courtesy of GENERAL MOTORS COMPANY

    Front Seat Back Rear Lower Cover (2) - Install

  13. Attach the front seat back rear lower cover bottom bungee clips to the cushion pan.
  14. Front Seat Back Rear Lower Cover Retainer (1) - Install [2x]
  15. GM5751524Courtesy of GENERAL MOTORS COMPANY

    Front Seat Back Finish Panel (2) - Install

  16. Return the upper front seat back cover to the original position and install the upper front seat back cover J-channel retainers.
  17. Front Seat Back Finish Panel Bolt (1) - Install and tighten [4x] - Fastener Specifications 
  18. GM5775559Courtesy of GENERAL MOTORS COMPANY

    Front Seat Cushion Front Finish Cover (1) - Install

  19. GM5751523Courtesy of GENERAL MOTORS COMPANY

    Front Seat Head Restraint (1) - Install

  20. GM5775558Courtesy of GENERAL MOTORS COMPANY

    Front Seat Back Upper Cover (1) - Install [2x]

  21. GM5308829Courtesy of GENERAL MOTORS COMPANY

    Front Seat Inner Adjuster Front Finish Cover (2) - Install

  22. Front Seat Adjuster Finish Cover Bolt (1) - Install and tighten [2x] - Fastener Specifications 
  23. GM5552551Courtesy of GENERAL MOTORS COMPANY

    Connect the electrical connector.

  24. Front Seat Cushion Outer Finish Cover (2) - Install
  25. Front Seat Cushion Outer Finish Cover Bolt -Rear (1) - Install and tighten - Fastener Specifications 
  26. GM5309114Courtesy of GENERAL MOTORS COMPANY

    Front Seat Cushion Front Finish Cover (3) - Install

  27. Front Seat Cushion Outer Finish Cover Bolt -Front (2) - Install and tighten - Fastener Specifications 
  28. Front Seat Cushion Front Finish Cover Bolt (1) - Install and tighten - Fastener Specifications 
  29. GM5751522Courtesy of GENERAL MOTORS COMPANY

    Front Seat (2) - Install - Front Seat Removal and Installation , or Front Seat Removal and Installation (Blackwing) 

scientia non olet · About LEMON Manuals