Installation Procedure
WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
Low Frequency Instrument Panel Antenna (2) - Install
- Low Frequency Instrument Panel Antenna Bolt (1) - Install and tighten [2x] - Fastener Specifications
Connect the electrical connectors.
- Front Floor Console Cup Holder (1) - Install
Front Floor Console Cup Holder Bolt (1) - Install and tighten [8x] - Fastener Specifications
Connect the electrical connector.
- Wireless Charging System Module (2) - Install
- Wireless Charging System Module Bolt (1) - Install and tighten [4x] - Fastener Specifications
Front Floor Console Trim Plate (1) - Install
- Connect the electrical connector.
Front Floor Console Trim Plate Bolt (2) - Install and tighten [2x] - Fastener Specifications
- Front Floor Console Variable 1 Liner (1) - Install
Slide the front floor console (1) back into the instrument panel.
Engage the tabs (3) on both sides of the front floor console.
- Connect the front floor console harness connector on both sides of the front floor console.
- Front Floor Console Bolt (1) - Install and tighten [6x] - Fastener Specifications
- Front Floor Console Bracket Bolt (2) - Install and tighten [2x] - Fastener Specifications
Front Floor Console Extension Panel - Right Side (1) - Install
- Return the seat to its original position.
Front Floor Console Extension Panel - Left Side (1) - Install
- Return the seat to its original position.
CAUTION:
Refer to Fastener Caution .