Removal Procedure
WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
- Raise and support the vehicle. Lifting and Jacking the Vehicle
- NOTE:
The rear wheel drive shaft universal joint retainer (1) and washers (2) are serviced as a rear wheel drive shaft universal joint retainer kit consisting of 2 bolts and 1 washer.
Remove and DISCARD the 6 rear wheel drive shaft universal joint retainer (1).
- Remove and DISCARD the 3 wheel drive shaft washers (2).
Reposition the rear wheel drive shaft (1) to clear the rear axle shaft.
Using the appropriate tool, release the rear axle shaft (1) from the differential carrier.
- Rear Axle Shaft- Left Side (1) - Remove
- Rear Wheel Drive Shaft Retaining Ring (2) - Remove and DISCARD