Installation Procedure
WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
- CAUTION:
Refer to Component Fastener Tightening Caution .
Differential Carrier Drain Plug (1) - Install and tighten - Fastener Specifications
- Fill the differential carrier with axle lubricant.
- Check the differential fluid level. It should be even with the bottom of the fill plug hole to no lower than 2 mm (0.08 in) below the opening.
Differential Carrier Fill Plug (1) - Install and tighten - Fastener Specifications
- Remove the drain pan.
- Lower the vehicle.