Removal Procedure
WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
Throttle Inlet Absolute Pressure Sensor Bolt (1) - Loosen until disengaged
- Raise and support the vehicle. Lifting and Jacking the Vehicle
- Front Tire Front Air Deflector Bolt (1) - Remove [4x]
- Front Tire Front Air Deflector (2) - Remove
Front Bumper Fascia Air Deflector Screw (1) - Remove [3x]
- Front Bumper Fascia Bolt (2) - Remove [2x]
Remove the front tire and wheel assembly. Tire and Wheel Removal and Installation
- Retainer (1) - Remove
- Engine Front Splash Shield Bolt (2) - Remove [5x]
- Engine Front Splash Shield (3) - Remove
Front Wheelhouse Liner Screw (1) - Remove [7x]
- Front Wheelhouse Liner Retainer (2) - Remove [4x]
- Front Wheelhouse Liner (3) - Remove
- Disconnect the electrical connector.
- Throttle Inlet Absolute Pressure Sensor Bolt (1) - Remove
- Throttle Inlet Absolute Pressure Sensor (2) - Remove