LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2021 >> CT4 Sport, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 59 (Engine Controls And Fuel - 2.0L (LSY) - Repair Instructions) >> Repair Instructions >> Fuel Pump Power Control Module Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
  1. GM5405471

    Fuel Pump Power Control Module (2) - Install

    2. CAUTION:

    Refer to Fastener Caution .

  3. Fuel Pump Power Control Module Nut (1) - Install and tighten [3x] - Fastener Specifications
  4. Connect the electrical connector.
  5. Lower the vehicle.
  6. If replacing, perform the fuel pump power control module configuration. K111 Fuel Pump Power Control Module Configuration 
scientia non olet · About LEMON Manuals