LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2021 >> CT4 Sport, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 59 (Engine Controls And Fuel - 2.0L (LSY) - Repair Instructions) >> Repair Instructions >> Fuel Pump Cover Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the oil fill cap.
  2. GM5335087

    Lift up on the front of the intake manifold cover (1).

  3. GM5335089

    Intake Manifold Cover (1) @ Upper Intake Manifold Bracket (2) - Remove

  4. GM5312607

    Radiator Surge Tank Inlet Hose Clip (1) @ Positive Crankcase Ventilation Hose - Remove

  5. Radiator Surge Tank Inlet Hose Clip (3) @ Fuel Pump Cover - Remove
  6. Radiator Surge Tank Inlet Hose Clip (2) @ Engine Wiring Harness - Remove
  7. GM5312610

    Radiator Surge Tank Inlet Hose Clip (1) @ Radiator Surge Tank Inlet Pipe Bracket - Remove

  8. Radiator Surge Tank Inlet Hose Clip (2) @ Radiator Surge Tank Inlet Pipe Bracket - Remove
  9. Radiator Surge Tank Outlet Pipe (3) - Reposition
  10. GM5422918

    Reposition wiring harness as necessary.

  11. Fuel Pump Shield Bolt (1) - Remove [3x]
  12. Fuel Pump Cover (2) - Remove
scientia non olet · About LEMON Manuals