LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2021 >> CT4 Sport, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 59 (Engine Controls And Fuel - 2.0L (LSY) - Repair Instructions) >> Repair Instructions >> Evaporative Emission Canister Vent Solenoid Valve Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and support the vehicle.
  2. GM5422357

    Rear Tire Front Air Deflector Bolt (1) - Remove [2x]

  3. Rear Tire Front Air Deflector (2) - Remove
  4. Remove the right rear tire and wheel assembly. Tire and Wheel Removal and Installation
  5. GM5422616
    NOTE:

    Components removed for graphic clarity.

    Rear Bumper Fascia Screw (1) - Remove [2x]

  6. Rear Wheelhouse Liner Screw (2) - Remove [8x]
  7. Retainer (3) - Remove [2x]
  8. Push Pin (4) - Remove
  9. Rear Wheelhouse Liner (5) - Remove
  10. Disconnect the electrical connector.
  11. GM5311572

    Evaporative Emission Canister Purge Hose (1) - Disconnect - Plastic Collar Quick Connect Fitting Service 

  12. Fuel Tank Vent Hose (2) - Disconnect - Plastic Collar Quick Connect Fitting Service 
  13. Evaporative Emission Canister Air Inlet Hose (3) - Disconnect - Plastic Collar Quick Connect Fitting Service 
  14. GM5311573
    NOTE:

    Release retaining tab to remove evaporative emission canister.

    Evaporative Emission Canister (1) - Remove

  15. GM5311576

    Remove the evaporative emission canister vent solenoid valve by rotating it clockwise. (1)