Removal Procedure
WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
- Raise and support the vehicle.
Rear Tire Front Air Deflector Bolt (1) - Remove [2x]
- Rear Tire Front Air Deflector (2) - Remove
- Remove the right rear tire and wheel assembly. Tire and Wheel Removal and Installation
- NOTE:
Components removed for graphic clarity.
Rear Bumper Fascia Bolt (1) - Remove [2x]
- Rear Wheelhouse Liner Bolt (2) - Remove [8x]
- Retainer (3) - Remove [2x]
- Push Pin (4) - Remove
- Rear Wheelhouse Liner (5) - Remove
Disconnect the electrical connector.
- Evaporative Emission Canister Purge Hose (1) - Disconnect - Plastic Collar Quick Connect Fitting Service
- Fuel Tank Vent Hose (2) - Disconnect - Plastic Collar Quick Connect Fitting Service
- Evaporative Emission Canister Air Inlet Hose (3) - Disconnect - Plastic Collar Quick Connect Fitting Service
- NOTE:
Release retaining tab to remove evaporative emission canister.
Evaporative Emission Canister (1) - Remove
- If replacing evaporative emission canister transfer parts as necessary.
WARNING:
Refer to Diesel/Gasoline Vapors Warning .
WARNING:
Refer to Safety Glasses Warning .