LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2021 >> CT4 Sport, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 59 (Engine Controls And Fuel - 2.0L (LSY) - Repair Instructions) >> Repair Instructions >> Evaporative Emission Canister Purge Hose Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
  1. Raise and support the vehicle. Lifting and Jacking the Vehicle
  2. Remove the right rear tire and wheel assembly. Tire and Wheel Removal and Installation
  3. GM5422357

    Rear Tire Front Air Deflector Bolt (1) - Remove [2x]

  4. Rear Tire Front Air Deflector (2) - Remove
  5. GM5422616
    NOTE:

    Components removed for graphic clarity.

    Rear Bumper Fascia Screw (1) - Remove [2x]

  6. Rear Wheelhouse Liner Screw (2) - Remove [8x]
  7. Rear Wheelhouse Liner Retainer (3) - Remove [2x]
  8. Rear Wheelhouse Liner Retainer (4) - Remove
  9. Rear Wheelhouse Liner (5) - Remove
  10. GM5403390

    Fuel Tank Vent Hose (3) @ Retainer (2) - Remove [2x]

  11. GM5403387

    Tie Strap (1) - Remove and DISCARD [5x]

  12. Retainer (2) - Remove [2x]
  13. Evaporative Emission Canister Purge Hose (3) - Disconnect - Plastic Collar Quick Connect Fitting Service 
  14. GM5403388

    Evaporative Emission Canister Purge Hose (1) - Disconnect - Plastic Collar Quick Connect Fitting Service 

  15. Evaporative Emission Canister Purge Hose (1) - Remove
scientia non olet · About LEMON Manuals