LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2021 >> CT4 Sport, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 59 (Engine Controls And Fuel - 2.0L (LSY) - Repair Instructions) >> Repair Instructions >> Evaporative Emission Canister Air Inlet Hose Replacement >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
    WARNING:

    Refer to Diesel/Gasoline Vapors Warning .

    WARNING:

    Refer to Safety Glasses Warning .

  1. Raise and support the vehicle.
  2. Remove the tire and wheel assembly. Tire and Wheel Removal and Installation
  3. GM5422357

    Rear Tire Front Air Deflector Bolt (1) - Remove [2x]

  4. Rear Tire Front Air Deflector (2) - Remove
  5. GM5422616
    NOTE:

    Components removed for graphic clarity.

    Rear Bumper Fascia Screw (1) - Remove [2x]

  6. Rear Wheelhouse Liner Screw (2) - Remove [8x]
  7. Retainer (3) - Remove [2x]
  8. Push Pin (4) - Remove
  9. Rear Wheelhouse Liner (5) - Remove
  10. GM5403389

    Remove the tie strap (1)

  11. Disconnect the quick disconnect and remove from the 2 retainers. Plastic Collar Quick Connect Fitting Service 
  12. Evaporative Emission Canister Air Inlet Hose (2) - Remove