Installation Procedure
WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
Camshaft Position Actuator Magnet Gasket (3) - Install NEW
- Camshaft Position Actuator Valve Solenoid (2) - Install
- Camshaft Position Actuator Valve Solenoid Bolt (1) - Install and tighten [2x] - Fastener Specifications
- Connect the electrical connector.
Intake Manifold Cover (1) @ Upper Intake Manifold Bracket (2) - Install
- NOTE:
Ensure the intake manifold cover fully engages the intake manifold cover studs.
Push down on the front of the intake manifold cover. (1)
- Install the oil fill cap.
CAUTION:
Refer to Fastener Caution .