LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2021 >> CT4 Sport, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 59 (Engine Controls And Fuel - 2.0L (LSY) - Repair Instructions) >> Repair Instructions >> Camshaft Position Actuator Replacement - Intake >> Removal Procedure

Removal Procedure

WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the oil fill cap.
  2. GM5335087

    Lift up on the front of the intake manifold cover (1).

  3. GM5335089

    Intake Manifold Cover (1) @ Upper Intake Manifold Bracket (2) - Remove

  4. GM5137012

    Electrical Connector (1) - Disconnect [3x]

  5. Retainer (2) @ Upper Intake Manifold Bracket (3) - Unclip [3x]
  6. Wiring Harness (4) - Reposition
  7. GM5137013

    Upper Intake Manifold Cover Bracket Bolt (1) @ Upper Intake Manifold Bracket (2) - Remove [2x]

  8. GM5137016

    Upper Intake Manifold Cover Nut (1) - Remove [2x]

  9. Upper Intake Manifold Bracket (2) - Remove
  10. GM5300181

    Disconnect the electrical connectors from the intake camshaft position actuator.

  11. Camshaft Lobe Position Actuator Bolt (1) - Remove [2x]
    12. NOTE:

    Replace only the components necessary to complete the repair.

  12. Camshaft Position Actuator (2) - Remove
scientia non olet · About LEMON Manuals