LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2021 >> CT4 Sport, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 59 (Engine Controls And Fuel - 2.0L (LSY) - Repair Instructions) >> Repair Instructions >> Accelerator Pedal Replacement >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
  1. GM5310579
    CAUTION:

    When installing the Accelerator Pedal do NOT use a mallet or excessive force on the pedal assembly or damage to the pedal assembly could occur, requiring replacement of the pedal assembly.

    Accelerator Pedal (3) - Install

  2. Slide the accelerator pedal (3) back in place to engage its lower retaining tabs.
  3. Tilt the top of the accelerator pedal forward.
  4. Connect the electrical connector to the accelerator pedal.
    CAUTION:

    Refer to Fastener Caution .

  5. Accelerator Pedal Bracket Bolt (2) - Install and tighten - Fastener Specifications
  6. Accelerator Pedal Cover (1) - Install
scientia non olet · About LEMON Manuals