Removal Procedure
WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
- Raise and support the vehicle. Lifting and Jacking the Vehicle
Front Bumper Fascia Center Air Deflector Screw (1) - Remove [10x]
Front Bumper Fascia Center Air Deflector Screw (1) - Remove [3x]
Front Bumper Fascia Center Air Deflector Screw (1) - Remove [6x]
- Front Bumper Fascia Center Air Deflector Bolt (2) - Remove [5x]
- Front Bumper Fascia Center Air Deflector Retainer (3) - Remove [2x]
Pull the front bumper fascia center air deflector (1) rearward and down from the front bumper fascia.
Radiator Air Lower Seal Retainer (1) - Remove [4x]
- Lower the vehicle.
Radiator Air Upper Baffle Retainer (1) - Remove [7x]
- Radiator Air Upper Baffle (2) - Remove
Wiring Harness Retainer (1) - Remove
- Radiator Upper Bracket Bolt (3) - Remove [4x]
- Radiator Upper Bracket (2) - Remove [2x]
Air Conditioning Evaporator Tube Clip Bolt (1) - Remove
- Air Conditioning Evaporator Tube Bracket (2) - Reposition
- Engine Coolant Fan Electrical Connector (3) @ Forward Lamp Wiring Harness (4) - Disconnect
Air Cleaner Bolt (1) - Remove
- Evaporative Emission Canister Purge Tube (2) - Disconnect - Plastic Collar Quick Connect Fitting Service
- Positive Crankcase Ventilation Tube (3) - Disconnect - Plastic Collar Quick Connect Fitting Service
- Electrical Connector (4) - Disconnect [2x]
Air Cleaner Outlet Duct Clamp (1) - Loosen
- Wiring Harness Retainer (2) @ Air Cleaner Assembly - Remove [4x]
- Engine Wiring Harness (3) - Reposition
Remove the air cleaner (1) and air cleaner outlet duct (2) as an assembly.
Air Conditioning Condenser Tube Clip (1) @ Engine Cooler Fan - Remove
- Auxiliary Radiator Outlet Pipe Clip (2) - Remove [2x]
- Auxiliary Radiator Inlet Pipe (3) - Reposition away
Engine Coolant Fan Bolt (2) - Remove [4x]
- Engine Cooler Fan (3) @ Engine Radiator (1) - Remove