Removal Procedure
WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
Reposition the seat as necessary to access the retaining clips.
- Using a flat-bladed plastic trim tool, release the retaining clips.
- Front Floor Console Extension Panel - Right Side (1) - Remove
Reposition the seat as necessary to access the retaining clips.
- Using a flat-bladed plastic trim tool, release the retaining clips.
- Front Floor Console Extension Panel - Left Side (1) - Remove
Front Floor Console Rear Cover Bolt (1) - Remove [2x]
- Front Floor Console Rear Trim Panel (2) - Remove
- Disconnect the electrical connectors.
Release the retaining tabs.
- Front Floor Console Rear Air Outlet (1) - Remove