Installation Procedure
WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
Floor Rear Air Outlet Duct - Left Side (3) - Install
- Clip the left side floor rear air outlet duct onto the body stud (2).
- Floor Rear Air Outlet Duct Retainer (1) - Install
- Return the rear carpet to the carpets original position.
Front Floor Panel Carpet - Left Side (3) - Install
- Floor Carpet Retainer (2) - Install [2x]
- Floor Carpet Retainer Button (1) - Install
Front Floor Console (1) - Install - Front Floor Console Removal and Installation (with M5N) , or Front Floor Console Removal and Installation (with MQA) , or Front Floor Console Removal and Installation (Blackwing)
Slide the accelerator pedal (3) back in place to engage the lower retaining tabs.
- Connect the electrical connector.
- Tilt the top of the accelerator pedal forward.
- Accelerator Pedal Bracket Bolt (2) - Install and tighten - Fastener Specifications
- Accelerator Pedal Cover (1) - Install
Driver Footrest (1) - Install
Starting at the front of the front side door sill garnish molding (1), engage the clip on the forward vertical wall and locator pin.
- Work your way rearward engaging all the front side door sill garnish molding clips to complete the installation.
Instrument Panel Outer Trim Cover (1) - Install
- Driver Seat - Install - Front Seat Removal and Installation , or Front Seat Removal and Installation (Blackwing)
CAUTION:
Refer to Fastener Caution .