Installation Procedure

WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.

Install the air conditioning refrigerant heat exchanger in to the engine compartment.
Courtesy of GENERAL MOTORS COMPANY

Air Conditioning Condenser Hose Seal (2) - Install NEW
Air Conditioning Refrigerant Heat Exchanger (1) @ Air Conditioning Condenser - Install
Courtesy of GENERAL MOTORS COMPANY

Retainer (1) @ Engine Control Module Bracket - Install
Courtesy of GENERAL MOTORS COMPANY

Air Conditioning Compressor and Condenser Hose Seal (2) - Install NEW
Air Conditioning Evaporative Connector Hose/Tube and Compressor Hose (1) @ Air Conditioning Condenser - Install
Courtesy of GENERAL MOTORS COMPANY

CAUTION:
Refer to Fastener Caution .

Air Conditioning Condenser Tube Clip (2) - Install
Air Conditioning Condenser Hose Nut (1) @ Air Conditioning Condenser - Install and tighten - Fastener Specifications
Courtesy of GENERAL MOTORS COMPANY

Air Conditioning Evaporator Tube Clip Bracket Bolt (4) - Install and tighten - Fastener Specifications
Air Conditioning Compressor Hose Seal (3) - Install NEW
Air Conditioning Evaporative Connector Hose/Tube and Compressor Hose (2) @ Air Conditioning Refrigerant Heat Exchanger - Install
Air Conditioning Compressor Hose Nut (1) - Install and tighten - Fastener Specifications
Courtesy of GENERAL MOTORS COMPANY

NOTE:
Some components not shown for graphic clarity.

Air Conditioning Evaporator Inlet Tube Seal (3) - Install NEW
Air Conditioning Evaporator Outlet Tube Seal (2) - Install NEW
Air Conditioning Refrigerant Heat Exchanger (1) @ Air Conditioning Evaporator Thermal Expansion Valve - Install
Courtesy of GENERAL MOTORS COMPANY

NOTE:
Some components not shown for graphic clarity.

Air Conditioning Evaporator Thermal Expansion Valve Hose Nut (1) @ Air Conditioning Evaporator Thermal Expansion Valve - Install and tighten - Fastener Specifications
Courtesy of GENERAL MOTORS COMPANY

Air Conditioning Refrigerant Heat Exchanger (2) - Install
Air Conditioning Evaporator Hose Clip Nut (1) - Install and tighten [2x] - Fastener Specifications
Courtesy of GENERAL MOTORS COMPANY

Fasten the auxiliary generator battery jumper cable (2) onto the lower air conditioning refrigerant heat exchanger bracket stud.
Fasten the engine harness (1) onto the air conditioning refrigerant heat exchanger bracket.
Recharge the refrigerant. Refrigerant Recovery and Recharging
Inspect for refrigerant leaks.