Installation Procedure
WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
- Inspect the new O-ring seal for any sign of cracks, cuts, or damage.
- Remove the cap or tape from the air conditioning refrigerant components.
- Using a lint-free clean, dry cloth, carefully clean the sealing surfaces of the air conditioning refrigerant components.
- Carefully slide the NEW O-ring seal (1) onto the air conditioning refrigerant component.
The O-ring seal (1) must be fully seated.
- Assemble the air conditioning components.
CAUTION:
New Air Conditioning sealing washers should never be exposed to any type of oil or lubricant, the rubber material may absorb the oil causing failures during installation or the life of the vehicle.
NOTE:
DO NOT reuse O-ring seals.