Cleaning and Inspection Procedure - Conditional
WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
- Using a wire brush or wire wheel, clean the wheel to brake rotor mating surface.
- Using the CH-41013 Rotor Resurfacing Kit, clean the rotor to wheel contact area.
- Using the CH-42450-A Wheel Hub Resurfacing Kit, clean the surfaces around the front and rear wheel hub bolts.
- Clean and inspect the threads, if damage is noticed replace as necessary.
- After cleaning all of the wheel and brake rotor contact areas, use brake cleaner or denatured alcohol to remove any dirt and debris from the wheel nuts and the brake rotor.
- Inspect and clean the contact areas of the wheel. Wheel Mounting Surface Check
WARNING:
Before installing the wheels, remove any buildup of corrosion on the wheel mounting surface and brake drum or disc mounting surface. Installing wheels with poor metal-to-metal contact at the mounting surfaces can cause wheel nuts to loosen. This can cause a wheel to come off when the vehicle is moving, causing loss of control and possibly personal injury.
NOTE:
Do not use power grinding tools to clean the brake rotor to wheel mating surfaces.