Removal Procedure
WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
- Raise and support the vehicle. Lifting and Jacking the Vehicle
- Remove the rear tire and wheel assembly. Tire and Wheel Removal and Installation
Rear Brake Rotor Cooling Duct Deflector Bolt (1) - Remove [3x]
- Rear Brake Caliper Cooling Air Scoop Retainer (4) - Remove [3x]
- Rear Brake Rotor Cooling Duct Deflector (2) - Remove
- Front Brake Rotor Cooling Duct Spacer (3) - Remove
Position a suitable jack stand under the rear suspension knuckle to aid in the removal of the rear suspension trailing arm bolt.
- Rear Suspension Trailing Arm Bracket Nut (1) - Remove
- Rear Suspension Trailing Arm Bracket Bolt (2) - Remove and DISCARD
- Rear Suspension Trailing Arm Nut (4) - Remove
- Rear Suspension Trailing Arm Bolt (3) - Remove and DISCARD
Rear Suspension Lower Trailing Link (1) - Remove