LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2021 >> CT4 Sport, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 48 (Front Suspension) >> Repair Instructions >> Front Stabilizer Shaft Link Replacement (FE2) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
  1. GM4991551Courtesy of GENERAL MOTORS COMPANY

    Front Stabilizer Shaft Link (1) - Install

  2. GM4991547Courtesy of GENERAL MOTORS COMPANY
    CAUTION:

    Refer to Fastener Caution .

    Front Stabilizer Shaft Link Nut- Lower (1) - Install and tighten - Fastener Specifications 

  3. GM4991545Courtesy of GENERAL MOTORS COMPANY

    Front Stabilizer Shaft Link Nut- Upper (1) - Install and tighten - Fastener Specifications 

  4. Install the front tire and wheel assembly. Tire and Wheel Removal and Installation
  5. Remove the support and lower the vehicle.