Installation Procedure
Catalytic Converter Gasket (2) - Install NEW
- With the aid of an assistant, install the exhaust muffler (1).
- CAUTION:
Refer to Fastener Caution .
Exhaust Muffler Hanger Bracket Nut (1) - Install and tighten [4x] - Fastener Specifications
Electrical Connector (1) - Connect
Electrical Connector (1) - Connect
Exhaust Muffler (1) @ Exhaust Intermediate Pipe Insulator-Right Side (2) - Install [2x]
Exhaust Muffler (1) @ Exhaust Intermediate Pipe Insulator-Left Side (2) - Install [2x]
Exhaust Pipe Clamp (1) - Tighten [2x] - Fastener Specifications
Catalytic Converter Nut (1) - Install and tighten [2x] - Fastener Specifications
Floor Panel Reinforcement (2) - Install
- Floor Panel Number 4 Cross Bar Reinforcement Bolt (1) - Install and tighten [6x] - Fastener Specifications
Underbody Rear Air Deflector- Right Side (5) - Install
- Underbody Rear Air Deflector Nut- Right Side (3) - Install and tighten [3x] - Fastener Specifications
- Underbody Rear Air Deflector Bolt- Right Side (2) - Install and tighten [3x] - Fastener Specifications
- Underbody Rear Air Deflector Nut- Right Side (4) - Install and tighten [2x] - Fastener Specifications
- Rear Wheelhouse Liner Bolt- Right Side (1) - Install and tighten - Fastener Specifications
Underbody Rear Air Deflector- Left Side (5) - Install
- Underbody Rear Air Deflector Nut- Left Side (2) - Install and tighten [3x] - Fastener Specifications
- Underbody Rear Air Deflector Bolt- Left Side (3) - Install and tighten [3x] - Fastener Specifications
- Underbody Rear Air Deflector Nut- Left Side (4) - Install and tighten [2x] - Fastener Specifications
- Rear Wheelhouse Liner Bolt- Left Side (1) - Install and tighten - Fastener Specifications
Rear Tire Front Air Deflector- Left Side and Right Side (2) - Install [2x]
- Rear Tire Front Air Deflector Bolt- Left Side and Right Side (1) - Install and tighten [4x] - Fastener Specifications
- Lower the vehicle.
- Inspect the exhaust system for leaks.