Installation Procedure
WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
Exhaust Intermediate Underbody Heat Shield (2) - Install
- Exhaust Heat Shield Bolt (1) - Install and tighten [6x] - Fastener Specifications
Catalytic Converter Gasket (2) - Install NEW
- Install the exhaust muffler (1) to the warm up three-way catalytic converter.
Catalytic Converter Nut (1) - Install and tighten [2x] - Fastener Specifications
Floor Panel Reinforcement (2) - Install
- Floor Panel Number 4 Cross Bar Reinforcement Bolt (1) - Install and tighten [6x] - Fastener Specifications
Underbody Rear Air Deflector-Right Side (5) - Install
- Underbody Rear Air Deflector Plastic Nut (3) - Install and tighten [3x] - Fastener Specifications
- Underbody Rear Air Deflector Bolt (2) - Install and tighten [3x] - Fastener Specifications
- Underbody Rear Air Deflector Nut (4) - Install and tighten [2x] - Fastener Specifications
- Rear Wheelhouse Liner Screw (1) - Install and tighten - Fastener Specifications
Rear Tire Front Air Deflector-Right Side (2) - Install
- Rear Tire Front Air Deflector Bolt (1) - Install and tighten [2x] - Fastener Specifications
Underbody Rear Air Deflector-Left Side (5) - Install
- Underbody Rear Air Deflector Plastic Nut (2) - Install and tighten [3x] - Fastener Specifications
- Underbody Rear Air Deflector Bolt (3) - Install and tighten [3x] - Fastener Specifications
- Underbody Rear Air Deflector Nut (4) - Install and tighten [2x] - Fastener Specifications
- Rear Wheelhouse Liner Screw (1) - Install and tighten - Fastener Specifications
Rear Tire Front Air Deflector-Left Side (2) - Install
- Rear Tire Front Air Deflector Bolt (1) - Install and tighten [2x] - Fastener Specifications
- Lower the vehicle.
- Inspect the exhaust system for leaks.
CAUTION:
Refer to Fastener Caution .