Installation Procedure
WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
Exhaust Front Underbody Heat Shield-Right Side (3) - Install
- Exhaust Heat Shield Bolt (2) - Install and tighten [5x] - Fastener Specifications
- Exhaust Heat Shield Nut (1) - Install and tighten [3x] - Fastener Specifications
Position back the right front edge of exhaust intermediate underbody heat shield (2).
- Exhaust Heat Shield Bolt-Right Front (1) - Install and tighten - Fastener Specifications
Catalytic Converter Gasket (2) - Install NEW
- Install the exhaust muffler (1) to the warm up three-way catalytic converter.
Catalytic Converter Nut (1) - Install and tighten [2x] - Fastener Specifications
- Lower the vehicle.
- Inspect the exhaust system for leaks.
CAUTION:
Refer to Fastener Caution .