Removal Procedure
WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
Disconnect and reposition heated oxygen sensor electrical connector (1).
Turbocharger Heat Shield Bolt (1) - Remove [3x]
Turbocharger Heat Shield (1) - Remove
Catalytic Converter Heat Shield Bolt (1) - Remove [2x]
- Catalytic Converter Heat Shield Nut (2) - Remove
Catalytic Converter Heat Shield (1) - Remove
WARNING:
In order to avoid being burned, do not service the exhaust system while it is still hot. Service the system when it is cool.
WARNING:
Avoid contact with HOT components. Wear safety glasses and protective gloves to avoid personal injury.