Removal Procedure
WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
- Raise and support the vehicle. Lifting and Jacking the Vehicle
- Remove the rear tire and wheel assembly. Tire and Wheel Removal and Installation
Disconnect the electrical connector. (1)
- Retainer (2) - Remove [4x]
Retainer (3) - Remove
- Rear Brake Caliper Bleeder Valve Cap (2) - Remove
- Rear Disc Brake Pad Wear Sensor (1) - Remove
NOTE:
If sensor is worn from contact with the rear brake rotor, then the rear disc brake pads must be replaced as well. Rear Disc Brake Pads Replacement (JE5, J55) , or Rear Disc Brake Pads Replacement (J6G)