LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2021 >> CT4 Sport, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 46 (Disc Brakes) >> Repair Instructions >> Rear Disc Brake Pad Wear Sensor Replacement (J6G) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
  1. GM5876760Courtesy of GENERAL MOTORS COMPANY

    Rear Disc Brake Pad Wear Sensor (1) @ Rear Disc Brake Inner Pad - Install

  2. GM5876761Courtesy of GENERAL MOTORS COMPANY

    Rear Disc Brake Pad Wear Sensor (2) @ Retainer (3) - Install [3x]

  3. Connect the electrical connector. (1)
  4. Install the right rear tire and wheel assembly. Tire and Wheel Removal and Installation
  5. Remove the support and lower the vehicle.
  6. Using a scan tool, relearn the rear disc brake pad wear sensor.
scientia non olet · About LEMON Manuals