Removal Procedure
WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect the battery negative cable. Battery Negative Cable Disconnection and Connection
- Raise and support the vehicle. Lifting and Jacking the Vehicle
- Remove the rear tire and wheel assembly. Tire and Wheel Removal and Installation
{ If equipped } Rear Disc Brake Pad Wear Sensor (1) @ Rear Disc Brake Inner Pad - Remove
Rear Brake Hose Fitting (2) - Remove
- Rear Brake Hose Fitting Gasket (3) - Remove and DISCARD [2x]
- Rear Brake Hose (1) @ Rear Brake Caliper - Remove
- Plug the rear brake hose outlet to prevent fluid loss and contamination.
Rear Brake Caliper Guide Pin (1) - Remove [2x]
- Rear Disc Brake Pad Spring (2) - Remove
Rear Brake Caliper Bracket Bolt (2) - Remove [2x]
- Rear Brake Caliper (1) - Remove
Rear Disc Brake Inner Pad (2) - Remove
- Rear Disc Brake Outer Pad (1) - Remove