Removal Procedure
WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
- Disconnect the battery negative cable. Battery Negative Cable Disconnection and Connection
- Raise and support the vehicle. Lifting and Jacking the Vehicle
- Remove the front tire and wheel assembly. Tire and Wheel Removal and Installation
Front Brake Caliper Bleeder Valve Cap (1) - Remove
- {If equipped} Front Disc Brake Pad Wear Sensor Grommet (2) @ Front Brake Caliper Bleeder Valve - Remove
- Front Brake Caliper Bleeder Valve (3) - Remove
- Plug the brake caliper bleeder valve orifice of the brake caliper to prevent brake fluid loss and contamination.
NOTE:
It is not necessary to remove the brake pad wear sensor from the caliper, it is only necessary to remove the brake pad wear sensor grommet from the bleeder valve.