Installation Procedure
WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
- Remove the plug from the brake caliper bleeder valve orifice of the brake caliper.
Front Brake Caliper Bleeder Valve (3) - Install and hand tighten
- Connect the battery negative cable. Battery Negative Cable Disconnection and Connection
- Check for brake system leaks.
- {If equipped} Front Disc Brake Pad Wear Sensor Grommet (2) @ Front Brake Caliper Bleeder Valve - Install
- Front Brake Caliper Bleeder Valve Cap (1) - Install
- Install the front tire and wheel assembly. Tire and Wheel Removal and Installation
- Remove the support and lower the vehicle.