LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2021 >> CT4 Sport, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 405 (Engine Mechanical - 2.0L (LSY) - Diagnostic Information And Procedures) >> Diagnostic Information and Procedures >> DTC C10C3 or C10C4 >> Circuit/System Description

Circuit/System Description

WARNING: This page is about a different car, the 2022 Cadillac CT5. However, it is still accessible from the selected car via links, so may be relevant.
Circuit Description
B+ Supplied from a fuse.
Control - 1 The output circuit is switched to 12 V to activate the component.
Control - 2 The output circuit is switched to ground to activate the component.
Component Description
K20 Engine Control Module The control module controls a series of actuators to ensure optimal engine performance. The control module does this by reading values from a variety of sensors, interprets the data and adjusts the engine actuators accordingly.
Q80L Engine Mount Solenoid Valve - Left A solenoid valve is an electro-mechanically operated valve. The valve is controlled by an electric current through the solenoid.
Q80R Engine Mount Solenoid Valve - Right A solenoid valve is an electro-mechanically operated valve. The valve is controlled by an electric current through the solenoid.

For an overview of the component/system, refer to: Engine Component Description

scientia non olet · About LEMON Manuals