Crankshaft Bearing Cap Bolt Sequence - Side
WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
| Crankshaft Bearing Cap Bolt Sequence - Side | |||||
|---|---|---|---|---|---|
| Callout | Component Name [Component Quantity] | Single Use Fastener/Component | Thread Locking Adhesive Required | Specification | Procedure |
| Metric (English) | |||||
| 1 | Crankshaft Bearing Cap Bolt- Side [8x] | Yes | Yes | First Pass: 30 N.m (22 lb ft) Final Pass: 60 degrees |
Crankshaft and Bearing Removal and Installation |