LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2021 >> CT4 Sport, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 377 (Power Seats) >> Diagnostic Information and Procedures >> DTC B1A65-B1A67 (Passenger) >> Circuit/System Testing

Circuit/System Testing

WARNING: This page is about a different car, the 2022 Cadillac CT5. However, it is still accessible from the selected car via links, so may be relevant.
  1. Ignition/Vehicle OFF, disconnect the X3 connector at the K40P Passenger Seat Adjuster Memory Module.
  2. Test for less than infinite resistance between circuit terminal 22 and circuit terminal 23.
    • If infinite resistance 

      Repair the open/high resistance in circuit 2452

    • Go to next step: If less than infinite resistance 
  3. Test for infinite resistance between circuit terminal 22 and ground.
    • If less than infinite resistance 

      Repair the short to ground on circuit 2452.

    • Go to next step: If infinite resistance 
  4. Ignition ON/Vehicle in Service Mode.
  5. Test for less than 1 V between circuit terminal 22 and ground.
    • If 1 V or greater 

      Repair the short to voltage on circuit 2452.

    • Go to next step: If less than 1 V 
  6. Replace the appropriate K40P Passenger Seat Adjuster Memory Module.
scientia non olet · About LEMON Manuals