Crankshaft Bearing Cap Bolt Sequence
WARNING: This page is about a different car, the 2022 Cadillac CT4. However, it is still accessible from the selected car via links, so may be relevant.
| Callout | Component Name [Component Quantity] | Single Use Fastener/Component | Thread Locking Adhesive Required | Specification | Procedure |
|---|---|---|---|---|---|
| Metric (English) | |||||
| 1 | Crankshaft Bearing Cap Bolt [10x] | - | - | First Pass: 20 N.m (15 lb ft) Final Pass: 120 degrees |
Crankshaft and Bearing Removal and Installation |