LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2021 >> CT4 Sport, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 366 (Engine Mechanical - 6.2L (LT4) - Repair Instructions) >> Repair Instructions >> Valve Rocker Arm Cover Replacement - Right Side >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2022 Cadillac CT5. However, it is still accessible from the selected car via links, so may be relevant.
  1. Install the valve rocker arm cover. Refer to Valve Rocker Arm Cover Installation - Right Side 
  2. NOTE:

    Note the location and routing of the wiring harness to ensure proper reinstallation.

  3. Wiring Harness Connector @ Ignition Coil - Connect [4x]
  4. Spark Plug Wire @ Ignition Coil - Connect [4x]
  5. Install the oil level indicator and tube. Refer to Oil Level Indicator Tube Replacement 
  6. GM4082883Courtesy of GENERAL MOTORS COMPANY

    Install the right rocker arm cover insulator. Refer to Valve Rocker Arm Cover Insulator Replacement - Right Side