Installation Procedure
WARNING: This page is about a different car, the 2022 Cadillac CT5. However, it is still accessible from the selected car via links, so may be relevant.
Front Wheel Speed Sensor (3) - Install
- Front Wheel Speed Sensor Bolt (2) - Install and tighten 9 N.m (80 lb in)
- Wheel Speed Sensor Wiring Harness Retainer (1) - Install
Wheel Speed Sensor Wiring Harness Retainer (3) - Install
- Wheel Speed Sensor Wiring Harness Retainer (5) - Install
- {If equipped} Front Disc Brake Pad Wear Sensor (4) @Wheel Speed Sensor Wiring Harness Retainer (5) - Install
- Front Wheel Speed Sensor (2) @Retainer (1) - Install [2x]
- Retainer (1) - Engage [2x]
Wheel Speed Sensor Wiring Harness Retainer (2) - Install
- {If equipped} Electrical Connector (3) @Wheel Speed Sensor Wiring Harness Retainer (2) - Install
- Connect the electrical connector. (1)
- Engine Front Splash Shield - Install - Engine Front Splash Shield Replacement (AWD)Engine Front Splash Shield Replacement (RWD)
- Install the front tire and wheel assembly. Tire and Wheel Removal and Installation (without J57)Tire and Wheel Removal and Installation (with J57)
- Remove the support and lower the vehicle.
CAUTION: