LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2021 >> CT4 Sport, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 329 (Suspension Controls System) >> Repair Instructions >> Electronic Suspension Wheel Front Vertical Accelerometer Replacement (FE2, FE3) >> Installation Procedure

Installation Procedure

WARNING: This page is about a different car, the 2022 Cadillac CT5. However, it is still accessible from the selected car via links, so may be relevant.
  1. Electronic Suspension Wheel Front Vertical Accelerometer (2) - Install
    GM5323940Courtesy of GENERAL MOTORS COMPANY
    2. CAUTION:

    Refer to Fastener Caution .

  2. Electronic Suspension Front Vertical Accelerometer Bolt (1) - Install and tighten9 N.m (80 lb in)
  3. Install the 3 electronic suspension wheel front vertical accelerometer retainers (1).
    GM5323937Courtesy of GENERAL MOTORS COMPANY
  4. Install the 5 electronic suspension wheel front vertical accelerometer retainers (2).
    GM5323934Courtesy of GENERAL MOTORS COMPANY
  5. Connect the electronic suspension wheel front vertical accelerometer electrical connector (1).
  6. Front Wheelhouse Liner - Reposition - Front Wheelhouse Liner Replacement , or Front Wheelhouse Liner Replacement (Blackwing)
  7. Install the front tire and wheel assembly. Tire and Wheel Removal and Installation (without J57) , or Tire and Wheel Removal and Installation (with J57)
  8. Remove the support and lower the vehicle.
  9. Clear DTCs
scientia non olet · About LEMON Manuals