Installation Procedure
WARNING: This page is about a different car, the 2022 Cadillac CT5. However, it is still accessible from the selected car via links, so may be relevant.
Using the mechanics wire, guide the oil pump flow control solenoid valve harness (3) into place, then remove the wire.
- Oil Pump Flow Control Solenoid Valve Harness Bolt (2) - Install and tighten to 15 N.m (11 lb ft)
- Engine Wiring Harness (1) - Connect
Oil Pump Flow Control Solenoid Valve Harness (3) @ Crankshaft Oil Deflector (1) - Install
- Oil Pump Flow Control Solenoid Valve Harness (3) @ Retainer (2) - Install
- Oil Pump Flow Control Solenoid Valve Harness (3) @ Oil Pump Flow Control Solenoid Valve (4) - Connect
- Lower Oil Pan - Install - Lower Oil Pan Replacement
CAUTION:
Refer to Fastener Caution .