Installation Procedure
WARNING: This page is about a different car, the 2022 Cadillac CT5. However, it is still accessible from the selected car via links, so may be relevant.
Engine Mount (2) - Install
Engine Oil Cooler Seal (2) - Install NEW [2x]
- Engine Oil Cooler (1) - Install
Engine Oil Cooler Adapter Bolt (1) - Install [4x] - Engine Oil Cooler Replacement (LGY)
- Remove the drain pan.
- CAUTION:
Refer to Fastener Caution .
Engine Mount Bolt (1) - Install and tighten to 58 N.m (43 lb ft) [2x]
Front Compartment Air Deflector (1) - Install - Front Compartment Air Deflector Replacement (RWD)
- Lower the vehicle.
- Lower the left side of engine onto mount.
Engine Mount Nut - Left Side (1) - Install and tighten to 70 N.m (52 lb ft)
- Engine Support Fixture - Remove - Engine Support Fixture
- Fill the engine oil to the proper level with NEW engine oil.