LEMON Manuals: Even more car manuals for everyone
Home >> Cadillac >> 2021 >> CT4 Sport, 4WD >> Repair and Diagnosis >> External Pages >> Different car >> Section 326 (Engine Mechanical - 3.0L (LGY) - Repair Instructions) >> Repair Instructions >> Engine Block Overhaul >> Cleaning Procedure

Cleaning Procedure

WARNING: This page is about a different car, the 2022 Cadillac CT5. However, it is still accessible from the selected car via links, so may be relevant.
    NOTE:

    Ensure proper use of room temperature vulcanizing (RTV) sealant. Use of Room Temperature Vulcanizing (RTV) and Anaerobic Sealant

  1. Remove any old thread sealant, gasket material or sealant using EN-28410  Gasket Remover.
  2. Clean all the following areas with solvent:
    • Sealing surfaces
    • Cooling passages
    • Oil passages
    • Bearing journals
  3. Clean all threaded and through holes with solvent.
    4. WARNING:

    Refer to Safety Glasses Warning .

  4. Dry the engine block with compressed air.
scientia non olet · About LEMON Manuals