Cleaning and Inspection Procedure
WARNING: This page is about a different car, the 2022 Cadillac CT5. However, it is still accessible from the selected car via links, so may be relevant.
Clean the crankshaft balancer in solvent that is compatible with the rubber (1).
- Dry the crankshaft balancer with compressed air.
WARNING:
Refer to Safety Glasses Warning .
Inspect the crankshaft balancer for the following:
- Worn or damaged hub-to-crankshaft surface (1)
- Worn, grooved or damaged hub seal surface (2)
A crankshaft balancer hub seal surface with excessive scoring, grooves, rust or other damage must be replaced.
- Worn, chunking or deteriorated rubber between the hub and pulley (3)
- Damaged drive belt ribs (4)
- Damaged webs (5)
- Repair or replace the crankshaft balancer as necessary.